PerformancePro Pumps · Hillsboro, Oregon, USA

PH Series

Aquaculture · Single speed · Models: P32-4690-7S-T2E6G-V, P33-4710-7S-T2F6G-V, P34-4800-7S-T2G6G-V, P36-4800-7S-T2L6G-V

Spec page · Performance curves · Manual (PDF)

Duty table

Head in feet of water and power in watts at each flow, read from the published curves (water, 60 Hz), every 10 GPM. A blank cell is past that model's maximum flow. Exact values for any point: https://performancepropumps.com/api/selector?gpm=…&head=…

Flow (GPM)	P32-4690-7S-T2E6G-V		P33-4710-7S-T2F6G-V		P34-4800-7S-T2G6G-V		P36-4800-7S-T2L6G-V
Flow (GPM)	Head (FT)	Power (W)	Head (FT)	Power (W)	Head (FT)	Power (W)	Head (FT)	Power (W)
0	67.7	619	72.9	779	81.8	788	87.3	960
10	61.4	692	71.3	864	81.4	917	86.9	1101
20	51.1	717	67.2	925	79.9	1028	86.3	1233
30	38.0	703	60.5	962	77.1	1121	85.2	1356
40	22.9	659	51.5	974	73.1	1192	83.8	1467
50	6.7	594	40.2	959	67.8	1240	81.9	1567
60			26.7	917	61.2	1263	79.4	1656
70			10.9	846	53.2	1259	76.3	1731
80					43.9	1226	72.6	1793
90					33.2	1163	68.1	1841
100					21.0	1067	62.8	1874
110							56.7	1892
120							49.6	1893
130							41.5	1878
140							32.3	1845

Maximum flow (GPM): P32-4690-7S-T2E6G-V 52, P33-4710-7S-T2F6G-V 72, P34-4800-7S-T2G6G-V 104, P36-4800-7S-T2L6G-V 145

Specifications

Spec	P32-4690-7S-T2E6G-V	P33-4710-7S-T2F6G-V	P34-4800-7S-T2G6G-V	P36-4800-7S-T2L6G-V
Design type	end suct.	end suct.	end suct.	end suct.
Max flow (GPM)	52	72	104	145
Max head (FT)	67.7	72.9	81.8	87.3
Max power (W)	720	970	1270	1900
Impeller number	CN1/2	CN3/4	CN1	CN2
Trim (IN)	4.69	4.71	4.8	4.8
Motor power (HP)	0.75	1	1.5	3
Enclosure	TEFC	TEFC	TEFC	TEFC
Speed (RPM)	3450	3450	3450	3450
Low volts (V)	230	230	230	230
Low volt amps (A)	2.26	3	3.74	7.34
High volts (V)	460	460	460	460
High volt amps (A)	1.13	1.5	1.87	3.67
Frequency (HZ)	60	60	60	60
Phase	3	3	3	3
Inverter capable	yes	yes	yes	yes
Weight (LBS)	23.7	24.7	36.3	48.7
Height (IN)	7.65	7.65	7.65	7.65
Length (IN)	14.7	14.21	16.22	18.19
Width (IN)	8.68	8.68	8.68	8.68
Port (IN)	1.5 NPT	1.5 NPT	1.5 NPT	1.5 NPT
Housing material	PP	PP	PP	PP
Seal material	SiC/SiC	SiC/SiC	SiC/SiC	SiC/SiC
Tested fluid	H2O	H2O	H2O	H2O
Datasheet	PDF	PDF	PDF	PDF

Limits

Results are a curve-coverage screen, not a final selection. Confirm the choice against the datasheet and the installation before ordering.
Curves are for water at 60 Hz. Salt water, other fluids, temperature, and 50 Hz supply are not considered.
NPSH and suction conditions are not checked.
Suction lift is not checked. A self-priming model is not confirmed to prime at any particular lift.
The system curve is assumed to be head = static + k * gpm^2 through the single design point given. Real piping, filters, and backwash duty are not modeled.
Motor voltage, phase, and enclosure are not matched to the site. See the spec rows for each model.
Variable-speed speed and watts are affinity-law estimates.