PerformancePro Pumps · Hillsboro, Oregon, USA

AP LS Series

Pond & Garden · Single speed · Models: AP-1/4-66, AP-1/3-73, AP-1/2-92, AP-3/4-105, AP-1-120

Spec page · Performance curves · Manual (PDF)

Duty table

Head in feet of water and power in watts at each flow, read from the published curves (water, 60 Hz), every 10 GPM. A blank cell is past that model's maximum flow. Exact values for any point: https://performancepropumps.com/api/selector?gpm=…&head=…

Flow (GPM)	AP-1/4-66		AP-1/3-73		AP-1/2-92		AP-3/4-105		AP-1-120
Flow (GPM)	Head (FT)	Power (W)	Head (FT)	Power (W)	Head (FT)	Power (W)	Head (FT)	Power (W)	Head (FT)	Power (W)
0	21.1	240	23.2	251	23.8	329	25.4	370	24.4	480
10	20.5	266	22.6	293	23.6	373	25.6	411	24.6	507
20	19.7	290	21.8	331	23.2	414	25.7	452	24.7	535
30	18.6	311	20.9	364	22.7	451	25.7	494	24.7	565
40	17.2	327	19.7	391	22.1	486	25.5	534	24.6	596
50	15.6	338	18.4	412	21.3	517	25.2	574	24.4	629
60	13.7	344	16.9	428	20.4	545	24.7	613	24.0	661
70	11.5	344	15.1	437	19.3	568	24.1	650	23.5	694
80	9.0	337	13.1	441	18.1	588	23.3	685	22.9	727
90	6.2	322	10.9	438	16.7	603	22.4	717	22.1	759
100	3.1	299	8.4	429	15.1	614	21.3	747	21.3	790
110			5.7	413	13.4	619	20.0	772	20.3	820
120			2.6	391	11.5	620	18.6	794	19.1	848
130					9.5	615	17.0	812	17.9	875
140					7.3	605	15.3	824	16.5	898
150					4.8	589	13.3	832	15.0	920
160							11.3	834	13.3	938
170							9.0	829	11.6	952
180							6.6	819	9.7	963
190									7.6	969
200									5.5	971

Maximum flow (GPM): AP-1/4-66 103, AP-1/3-73 120, AP-1/2-92 154, AP-3/4-105 184, AP-1-120 200

Specifications

Spec	AP-1/4-66	AP-1/3-73	AP-1/2-92	AP-3/4-105	AP-1-120
Design type	self prime	self prime	self prime	self prime	self prime
Max flow (GPM)	103	120	154	184	200
Max head (FT)	21.1	23.2	23.8	25.4	24.4
Max power (W)	350	440	620	830	970
Impeller number	AP2H	AP3H	AP1/2L	AP3/4L	AP1L
Trim (IN)	4.91	5.12	5.12	5.15	5
Motor power (HP)	0.34	0.45	0.68	1.01	1.35
Enclosure	TEFC	TEFC	TEFC	TEFC	TEFC
Speed (RPM)	1725	1725	1725	1725	1725
Low volts (V)	115	115	115	115	115
Low volt amps (A)	3.5	4.4	6.4	9.4	13
High volts (V)	230	230	230	230	230
High volt amps (A)	1.75	2.2	3.2	4.7	6.5
Frequency (HZ)	60	60	60	60	60
Phase	1	1	1	1	1
Inverter capable	no	no	no	no	no
Weight (LBS)	39.3	42.3	46.3	58.3	67.3
Height (IN)	16.85	16.85	16.85	16.85	16.85
Length (IN)	30.54	30.54	31.16	33.53	33.53
Width (IN)	11.25	11.25	11.25	11.25	11.25
Port (IN)	3	3	3	3	3
Housing material	PP	PP	PP	PP	PP
Seal material	C/Cer	C/Cer	C/Cer	C/Cer	C/Cer
Tested fluid	H2O	H2O	H2O	H2O	H2O
Datasheet	PDF	PDF	PDF	PDF	PDF

Limits

Results are a curve-coverage screen, not a final selection. Confirm the choice against the datasheet and the installation before ordering.
Curves are for water at 60 Hz. Salt water, other fluids, temperature, and 50 Hz supply are not considered.
NPSH and suction conditions are not checked.
Suction lift is not checked. A self-priming model is not confirmed to prime at any particular lift.
The system curve is assumed to be head = static + k * gpm^2 through the single design point given. Real piping, filters, and backwash duty are not modeled.
Motor voltage, phase, and enclosure are not matched to the site. See the spec rows for each model.
Variable-speed speed and watts are affinity-law estimates.